Hello all.

Wow... its been a long time between drinks... but I have made it back. A great many things all happening at once really blindsided me and absolutely nothing has happened about this build...

Sadly I lost all of the information I had collated on this project when I switched jobs. I also had several seizures, which do strange things to my memory. So I am basically going to start fresh.

Despite some challenges, there have been some real positives too - one being I have moved into a much larger house, with a workshop. Another is the new work environment - filled with useful machinery - enourmous lathes and CNC mills etc. - some of which I operate.

Here is where I am at:

1) I want to build Altec 19's or an MLTL derivative. I will buy GPA drive units and import them..

2) I have the 811 horn which I can copy - or I can make better horns if someone can share a plan with me.

3) I had decided to use an upgraded XO network designed by Zilch. The XO was going to be used if I built replica 19's but I cannot recall if I was going to be able to use the same same design in MLTL cabinets.

I'm going back through posts and pms.. but if anyone can point me back to the road regarding the XO issue and a suitable wooden radial horn design for the GPA hf unit, I would be humbled and truly grateful.

I will get back on track with this and i will share here. Thank you all.